Toshiba Magnia 3310 - Manual (Page 38)

Getting Started
Front view (with the front doors opened)
19
NOTE: When a status indicator is lit amber, the
corresponding hard disk drive may be faulty. If it is found to
be defective, replace it. If your system has a built-in RAID
controller, you can replace the faulty drive without interrupting
the system operation.
Shock and vibration might damage hard disk drives, causing
the loss or corruption of the data and programs recorded on
them. So always handle them carefully.
Installing and replacing a hard disk drive requires special
techniques and knowledge. So instead of installing or
replacing it yourself, ask an authorized MAGNIA service
provider for assistance.
An error committed during installation or replacement,
especially when the system is running, might result in a
system failure and/or the corruption or loss of important data
and programs.
Keep hard disk drives free from shock and vibration,
especially when they are on. Even if the status indicator is off,
its magnetic head remains in the data area and, if a shock is
given, it might destruct the data area.
When the server is switched off, the magnetic head of each
hard disk drive automatically retracts. Note that it takes about
30 seconds for a hard disk drive to stop completely.
See “Hard Disk Drive (HDD)” on page 121.
(9) Side panel lock
Releasing the side panel lock allows you to remove the side panel,
and make access to the internal components.
(10) Lower door security
The lower door provides access to the hard disk drives and the side
panel lock.