Toshiba Magnia 3310 User Manual

Page 41

Getting Started
Rear view

(5) Parallel connector (

)

Used to connect a printer.

(6) RGB connector (

)

Used to connect a display device.

(7) Ether1 connector (

)

Used to connect a 1000BASE-T, 100BASE-TX or 10BASE-T
Ethernet LAN.

(8) Ether2 connector (

)

Used to connect a 100BASE-TX or 10BASE-T Ethernet LAN.

(9) USB1 connector (

)

Used to connect USB (Universal Serial Bus) devices.
When connecting a USB device, ensure that the operating sys-
tem installed supports USB1.1.

(10) USB2 connector (

)

Used to connect USB (Universal Serial Bus) devices.
When connecting a USB device, ensure that the operating sys-
tem installed supports USB1.1.

(11) Ether1 indicator (ACT)

Indicates the communication status of Ether1.
Flashing green ... Data being transferred
Off ... No traffic/connection error

(12) Ether1 indicator (LNK)

Indicates the communication status of Ether1.
Lit yellow...Connected successfully
Off...Not operating/operation error

(13) Ether2 indicator (ACT)

Indicates the communication status of Ether2.
Flashing green ... Data being transferred
Off ... No traffic/connection error

(14) Ether2 indicator (LNK)

Indicates the communication status of Ether2.
Lit green ...Connected successfully
Off...Not operating/operation error

Ether