Toshiba Magnia 3310 - Manual (Page 100)

Installing and Removing Hardware
Memory module 82
Connect the redundant exhaust fan module to FAN1-R on the
motherboard.
Attaching the exhaust fan cables
13 If expansion cards have been removed, install them according
to the procedure.
See the steps 4 and 5 in “Installing the expansion card” on page
132.
14 Insert the exhaust fan duct and attach it in the server by sliding
it toward the front of the server.
NOTE: When a 3.06 GHz CPU module is mounted, Steps 14
and 15 (installing the exhaust fan duct) are not required.
Attaching the exhaust fan duct