Toshiba Magnia 3310 - Manual (Page 150)

Installing and Removing Hardware
Expansion cards 132
Installing the expansion card
WARNING: Do not touch any parts except those necessary
for installing the device. There are many high-voltage parts
that may cause an electric shock.
When installing or removing the expansion card, shut the
server down, turn off the power, and pull out the power plug
from the wall outlet. Otherwise, this may cause an electric
shock.
CAUTION: Put on gloves when installing or removing the
expansion card. Your hands may be injured by sharp
projections on the optional boards or the server.
Install the expansion card in the procedure described below, after
referring to “Before starting operation” on page 57:
1 If the server is running, shut it down and turn off the power.
2 Unplug all the power cables of the server.
NOTE: Installing the expansion card while the power is on
may damage the server and expansion card.
3 Remove the server panels.
See “Removing and replacing the server panels” on page 25.