Toshiba Magnia 3310 - Manual (Page 249)

234
NOTE: Before clearing information, remove all expansion
cards.
Preset jumper switch settings view
NOTE: The system will stop running if the jumper switches
are set incorrectly. Carefully read appendix C when changing
the jumper switch settings.
4. Password clear:
1. CMOS clear:
3. Not used:
The password is cleared if the
server is started with this switch in
the “ON” position.
Data in the flash memory is cleared
if the server is started with this
switch in the “ON” position.
Do not change the setting.
Do not change the setting. 2. Not used: