Toshiba Magnia 3310 - Manual (Page 66)

Getting Started
Setup of system configuration
47
Setup of system configuration
If the system is used as it was configured at the factory, it was
properly set up before shipment. However, if something optional is
added to the system after shipment, or it is desired to change the
operating condition properly for use, it is required to set up the
system once again.
There are the following utilities prepared for setup of the system
configuration.
For details
See “System Configuration Setup” on page 148.
NOTE: When the system configuration is changed, note
down the configuration information.
BIOS setup utility
This utility software is designed to manage (set, store, etc.) the
hardware resources of the server, for example: I/O ports address,
DMA channels, and interrupt levels.
System time setup
The system time can be set up using the BIOS setup utility or on
the OS you are using.
Generally, a slight error occurs in clock precision. If the clock is
not adjusted for a long time, this error builds up, and may increase
to the point that system operation is adversely affected. To prevent
this, periodically adjust the system time.
Onboard SCSI utility
The Onboard SCSI Utility is to be used to set the onboard SCSI
units and onboard SCSI controller.