Toshiba Magnia 3310 - Manual (Page 48)

Getting Started
Removing and replacing the server panels
29
Replacing the side panel (for pedestal models)
Follow these steps to replace the side panel:
1 Replace the side panel to the server carefully so that it does not
catch any cable.
2 Turn the side panel lock clockwise to lock the side panel.
3 Make sure all the panels are firmly locked, then close the front
doors.
4 Plug all the power cables.
NOTE: Be sure to lock the side panel after replacing it to the
server. Even when the front panel is locked, the side panel
might come off accidentally if it is not locked.
Replacing the top panel (for rack models)
Follow these steps to replace the top panel:
1 Replace the top panel to the server carefully so that it does not
catch any cable.
2 Turn the side panel lock clockwise to lock the top panel.
3 Push the stoppers in the rack rails on both sides to release the
lock and slightly return the server to the rack.
Releasing the lock