Toshiba Magnia 3310 - Manual (Page 78)

Installing and Removing Hardware
Installing and removing optional devices 60
NOTE: You may have to remove cable(s) when installing
optional devices. In this case, check the relative position
between the device and cables before disconnecting the
cables to prevent mistakes when reconnecting the cables.
When connecting a cable to the server, pay careful attention
to the shape of the connector. If a incorrect connector is forc-
ibly connected, it may bend or damage the connector pins. If
the cable connector has thumb screws for fastening, tighten
them to secure the connection.
The user is not permitted to remove the server from the rack.
If it is hard to install/remove an optional device as the server
is mounted on the rack, ask an authorized MAGNIA service
provider to do the work. (Services will be provided for a fee.)
Special knowledge and technique are required for installing
an optional device to the server of the rack model. If you have
no experience in installing an option to the rack model or you
consider the job difficult, consult with an authorized MAGNIA
service provider about installation. (Services will be provided
for a fee.)