Toshiba Magnia 3310 - Manual (Page 203)

Installing Software
Windows® 2000 Server 186
6 When the “Found New Hardware Wizard” screen is displayed,
select “Next”.
7 When the “Install Hardware Device Drivers” screen is dis-
played, select “Display a list of the known drivers...” and select
“Next”.
8 Select “SCSI and RAID controllers” at “Hardware types”, and
select “Next”.
9 Select “Unknown Manufacturer” at “Manufacturers” and
select “Next”.
10 When the “Update Driver Warning” message is displayed,
select “Yes”.
11 When the “Start Device Driver Installation” screen is dis-
played, select “Next”.
12 When the “Completing the Found New Hardware Wizard”
screen is displayed, select “Finish”.
Installing the onboard network adapter driver
1 Start Windows 2000, and log onto Windows 2000 as the
Administrator (or a user having equivalent rights).
2 Select “Start” - “Settings” - “Control Panel” - “System” -
“Hardware” - “Device Manager”.
3 Two "Ethernet Controller" are displayed under the "Other
devices".
Select uppder "Ethernet Controller" and right click on it. Select
"Properties" in the menu that is displayed and Ether1 adapter's
properties are displayed.
4 Select “Driver” tab, then select “Update Driver”.
5 When the Upgrade Device Driver Wizard starts, select “Next”.
6 Select “Display a list of the known drivers…”, select “Next”.
7 Select “Network adapters”, select “Next”.