Toshiba Magnia 3310 - Manual (Page 126)

Installing and Removing Hardware
CPU module 108
Post-procedure after installing/removing the CPU module
NOTE: When a 3.06 GHz CPU module is attached, Steps 1
and 2 (installing the exhaust fan duct) are not required.
1 Insert the exhaust fan duct and attach it in the server by sliding
it toward the front of the server.
Attaching the exhaust fan duct
2 Lock the exhaust fan duct by turning the screw clockwise.
Locking the exhaust fan duct
3 Fit the panels to the server.
See “Removing and replacing the server panels” on page 25.