Toshiba Magnia 3310 - Manual (Page 187)

System Configuration Setup
Onboard SCSI utility
169
Include in BIOS Scan: Yes
Set whether or not to scan SCSI devices during SCSI BIOS
bootup.
Advanced Configuration Options
Set the detailed data of the onboard SCSI controller.
Reset SCSI Bus at IC Initialization: Enabled
Set whether or not to reset the SCSI bus at the onboard
SCSI controller reset process.
Display Message During BIOS Initialization: Enabled
Set the data to be displayed in the SCSI utility start mes-
sage.
Extended Int 13 Translation for DOS Drives >1GByte: Enabled
Set whether or not to enable extended BIOS on the DOS
drive when the disk capacity exceeds 1GB.
POST Display Mode: Verbose
Control the data to be displayed during bootup.
SCSI Controller Int 13 Support: Enabled
Set whether or not to enable Int13 Extension.
Domain Validation: Enabled
Set whether or not to enable Domain Validation.
Support Removable Disks Under Int 13 as Fixed Disks: Disabled
Set whether or not to support disks that can be removed
under SCSI BIOS.
BIOS Support for Bootable CD-ROM: Enabled
Set whether or not to enable bootup from CD-ROM.