Toshiba Magnia 3310 - Manual (Page 172)

System Configuration Setup
BIOS setup utility 154
™ BASE I/O address
Set the I/O port address of the parallel port.
™ Interrupt
Set the interrupt number of the parallel port.
™ DMA channel
Set the DMA channel number of the parallel port.
Floppy disk controller : Enabled
Set whether the built-in floppy disk controller is to be enabled
or disabled; select “Enabled.”
™ On Board Device
Onboard SCSI : Enabled
Make the settings of the onboard SCSI.
Onboard NIC1 : Enabled
Make the settings of the onboard LAN(Ether1).
Onboard NIC2 : Enabled
Make the settings of the onboard LAN(Ether2).
Onboard USB : Enabled
Make the settings of the onboard USB.
™ Installed O/S
Specify the OS (operating system) installed on your system.
Specify “Win 2000/.NET” if Windows Server 2003/
Windows 2000 is installed on your system, or “Others” if
another operating system is installed.
™ Boot time Diagnostic Screen
Do not change the setting.
™ Reset Configuration Data
Do not change the setting.