Toshiba Magnia 3310 - Manual (Page 65)

Getting Started
Making a floppy disk 46
Making a floppy disk
The server setup support software “Server Setup TooL” has the
function to make floppy disks of data on the driver, utilities and so
on used in this system. Make floppy disks depending on the
situation, and keep them for future use.
How to make a floppy disk
For making a floppy disk with the “Server Setup TooL,” follow the
procedure mentioned below, referring to the instructions appearing
on the display for details:
1 Following the steps in “Starting up by the CD-ROM” on page
43, set both the “Server Setup TooL CD-ROM” in the respec-
tive drives, and start the “Server Setup TooL.”
2 Select "Utilities" from the main menu of "Server Setup TooL".
3 Select “Create Floppy Disks.”
4 Select the name of the floppy disk to make.
5 Set a 1.44MB formatted floppy disk in the disk drive and then
select “Create.”
If another floppy disk is set in the drive, remove it before mak-
ing the floppy disk.
For details of making a floppy disk:
See “Installing Software” on page 172.
See “Server Setup TooL for MAGNIA3310 User’s Guide” (on
this Server Setup TooL- and Documentation CD).