Toshiba Magnia 3310 - Manual (Page 156)

Installing and Removing Hardware
Expansion cards 138
8 Raise the card support of a slot to be installed and remove the
expansion slot panel.
Raising the card support
9 Install RAID controller MR520 in the third PCI slot (PCI-3)
from the top according to the procedure for the installation of
ordinary expansion cards.
See “Installing the expansion card” on page 132.
For the RAID controller MR520 to which an internal hard disk
drive is connected, install it only in the third slot (PCI-3) from
the top.
Installing the RAID controller MR520
Install RAID controller MR518 in the third PCI slot (PCI-3)
from the top according to the procedure for the installation of
ordinary expansion cards.
See “Installing the expansion card” on page 132.