beautypg.com

Toshiba Magnia 3310 User Manual

Page 163

background image

Installing and Removing Hardware

Power supply unit

145

Remove the EPS-R module in the procedure below, after referring
to “Before starting operation” on page 57:

1 Remove the lock if it is attached on the security loop on the

back of the server.

2 Disconnect the power cable from the power connector of

power supply module to be removed.

NOTE: The power supply module to which the power cable is
connected cannot be pulled out.

3 Grasp the handle to pull out the EPS-R module while holding

down the eject lever of the EPS-R module and draw the
module out halfway, and gently remove the EPS-R module
holding it with both hands.

Pulling out the EPS-R module

NOTE: Wait at least one minute before returning the power
module to the server. If the power module is inserted
immediately, the system might crash or the server might be
damaged.