Toshiba Magnia 3310 - Manual (Page 200)

Installing Software
Windows® 2000 Server
183
NOTE: When using RAID Controller, be sure to install the
RAID Controller Utility after installation of the Windows 2000.
RAID controller utilities: Install Power Console Plus for RAID
controller MR518/MR520.
See “RAID Controller's User’s Guide.”
Selecting a driver for the onboard SCSI controller
To select the driver, follow these steps.
1 When the Windows 2000 Server Setup screen appears and
"Press F6..." is displayed in the lower left hand corner of the
screen, press the F6 key.
2 When a message appears on the screen, asking whether you
want to add a device driver for mass storage device, press the
key.
3 Insert the “Adaptec SCSI Windows 2000 Driver” floppy disk,
which was created previously with the Server Setup TooL,
onto the floppy disk drive, and then press the key.
4 When the following message appears, select “Adaptec
Ultra320 SCSI Cards (Win2000)” and then press the
key.
If there are no other SCSI drivers to be added, then continue to
install Windows 2000, following the instructions that appear
on the screen.
Adaptec Ultra320 SCSI Cards (Win2000)