Toshiba Magnia 3310 - Manual (Page 130)

Installing and Removing Hardware
Replacing the internal battery 112
7 Install the new battery with polarity (+) up, and fit it in so that
the entire battery is horizontal.
Be sure to install the battery while holding it with your hands
to prevent it from falling.
Installing the battery
8 If expansion cards have been removed, install them according
to the procedure.
See the steps 4 and 5 in “Installing the expansion card” on page
132.
9 Fit the panels to the server.
See “Removing and replacing the server panels” on page 25.
10 Connect all the power cables of the server to the power supply,
and switch on the server.
11 Press while the server is rebooting, and set up the server
based upon the system configuration information that you
noted down.