Toshiba Magnia 3310 - Manual (Page 217)

Troubleshooting
Troubleshooting
201
The system status indicators and disk status indicators turn
on abnormally
When the lit state of the system status indicators and disk status
indicators differs from the specifications described in this manual,
a cause could be a malfunction, a faulty cable connection, or some
other trouble in the server. If Windows Server 2003/Windows
2000 can be used, proceed to “Remedy When Windows Server
2003/ Windows 2000 is usable” on page 208.
If Windows Server 2003/Windows 2000 cannot be used, turn off
the power first, and then proceed to “Remedy When Windows
Server 2003/ Windows 2000 is unusable” on page 210.
The power indicator on this server lights in amber when the power
cord is connected to the AC outlet, and flashes green while the
server is changing over to the power save mode.
See “(6) System status indicators” on page 14.
See “(8) HDD status indicators” on page 18.
The amber disk and status indicators light and flash amber
A probable cause is that a hard disk drive connected to the RAID
controller is malfunctioning. If Windows Server 2003/
Windows 2000 can be used after checking from the lit state of the
disk status indicators which hard disk drive is malfunctioning,
proceed to “Remedy When Windows Server 2003/ Windows
2000 is usable” on page 208.
If Windows Server 2003/Windows 2000 cannot be used, turn off
the power first, and then proceed to “Remedy When Windows
Server 2003/ Windows 2000 is unusable” on page 210.
See “(8) HDD status indicators” on page 18.
See “Hard Disk Drive (HDD)” on page 121.