Toshiba Magnia 3310 - Manual (Page 101)

Installing and Removing Hardware
Memory module
83
15 Lock the exhaust fan duct by turning the screw clockwise.
Locking the exhaust fan duct
16 Fit the panels to the server.
See “Removing and replacing the server panels” on page 25.
17 Connect all the power cables of the server to the power supply,
and switch on the server.
Removing a memory module
Before removing a memory module, carefully read “Before
starting operation” on page 57 and proceed following the
procedure mentioned below:
1 If the server is on, shut it down first and turn off the power.
2 Unplug all the power cables from the AC outlets.
NOTE: Removing a memory module while the server is on
could cause damage to the server and/or the memory
module.
3 Remove the panels from the server.
See “Removing and replacing the server panels” on page 25.