Toshiba Magnia 3310 - Manual (Page 56)

Getting Started
Connecting peripheral devices
37
Connecting peripheral devices
There are I/O connectors for connecting peripheral devices such as
a display, keyboard, mouse and so on, on the back of the server.
Properly connect the peripheral devices to the I/O connectors
before turning on the server. Connect peripheral devices to the
server, according to the following procedure:
1 Make sure that all the power buttons of the server and external
units are turned off.
2 If the power cables of the server and external units are con-
nected to AC outlets, pull all the plugs of the power cables out
of the AC outlets.
3 Connect each of the peripheral devices to a proper connector
on the server with an interface cable. Insert the connectors
making sure that the shapes of the connectors are facing the
correct way.
Connecting peripheral devices