Attaching the rails, Removing the 5.25-inch shield cover – Toshiba Magnia 550d User Manual
Page 99
Connecting Hardware Devices
Hard disk drive (HDD) – SCSI HDD –
82
5 Attach the two rails to the adapter plate for the 5.25-inch
device bay and fasten each rail with the two screws.
Use the screw B supplied with the server.
See “Before you start” on page 43.
Attaching the rails
6 Remove the screws fastening the 5.25-inch shield cover and
then remove the 5.25-inch shield cover.
For installing additional hard disk drives, use the device bay
slots in order from the lowest to the highest.
Carefully store the removed 5.25-inch shield covers for future
use.
Removing the 5.25-inch shield cover