Toshiba Magnia 550d - Manual (Page 118)

Connecting Hardware Devices
Uninterruptible power supply unit (UPS)
101
Uninterruptible power supply unit (UPS)
When connecting the server to an uninterruptible power supply
unit (UPS), use the UPS recommended by Toshiba.
When restarting a server connected using a UPS after power
failure, use the BIOS Setup Utility as follows.
1 Activate the server and press the key.
The BIOS screen is displayed
2 Select “POWER MANAGEMENT SETUP” and press the
key.
3 Set “AC Back Function” to “Full-On.”
4 Press the key.
5 Select “SAVE & EXIT SETUP” and press the key.
6 Press the key and then key.
The data on the revised setting is saved and the server restarts.