5 unplug the power cable and signal cable, 8 replace the side panel and front door panel, 9 plug in the power cable and switch on the server – Toshiba Magnia 550d User Manual

Page 101

Connecting Hardware Devices
Hard disk drive (HDD) – SCSI HDD –

4 Remove the two screws securing the adapter plate for the 5.25-

inch device bay in order to remove the hard disk drive from the
server. Pull the hard disk drive in the direction of the server’s
front side.

5 Unplug the power cable and signal cable.

6 Remove the hard disk drive together with the adapter plate to

install the 5.25-inch device bay.

7 Fit the 5.25-inch shield cover to the vacant device bay slot and

fasten it with the screw.

8 Replace the side panel and front door panel.

9 Plug in the power cable and switch on the server.