Toshiba Magnia 550d - Manual (Page 50)

Getting Started
Starting the server
33
Starting the server
The server can be started from any of the following devices: hard
disk drive, floppy disk drive, and CD-ROM drive.
Starting the server from the floppy disk drive
To start the server from the floppy disk drive, proceed as follows:
1 Insert a bootable floppy disk in the floppy disk drive.
2 Switch on the server.
Starting the server from the hard disk drive
(if an operating system is installed on it)
To start the server from the hard disk drive, proceed as follows:
1 Ensure that no floppy disk is inserted in the floppy disk drive.
2 Switch on the server.
NOTE: The server does not start in some system
configurations.
Check the system configuration, and set the starting order of
the 1st, 2nd, and 3rd boot drives in the “BIOS FEATURES
SETUP” dialog box of the BIOS Setup Utility.
See “System Configuration Setup” on page 104.