Toshiba Magnia 550d - Manual (Page 121)

System Configuration Setup
BIOS Setup Utility
105
NOTE: The windows shown in this chapter are examples and
may be differ slightly from the actual windows shown.
Starting the BIOS Setup Utility
The BIOS window appears on the screen when you start the
server.
To start the BIOS Setup Utility, press the key
immediately after the window shown above is displayed on the
screen. Pressing the key causes your server to start the
BIOS Setup Utility after it completes the Power On Self Test
(POST).
NOTE: If you don’t press the key, your server starts
to load the operating system on completion of the POST.
Check System Health OK,
CPU ID: XXXX Patch ID: XXXX
Pentium III XX - XXXX MHz
Checking NVRAM..
XXXXXX kB OK
Hit DEL if you want to run SETUP
(C)American Megatrends Inc.,
XX-XXXX-XXXXXX-XXXXXXXX-XXXXXX-XXXXXXXX-XXXXXXXX-X
Released: xx/xx/xxxx
AMI BIOS(C)1999 American Megatrends Inc., American
Megatrends
XXXXX XXX