Removing the drive carrier, Removing the 3.5-inch shield cover – Toshiba Magnia 550d User Manual

Page 87

Connecting Hardware Devices
Hard disk drive (HDD) – IDE HDD –

5 Remove the two screws securing the drive carrier. While

pressing the latch down, remove the drive carrier by sliding it
in the direction of the server’s front side.

Removing the drive carrier

NOTE: When removing the drive carrier, be careful not to
catch the cables on the drive carrier or touch the memory
module.

6 Remove the 3.5-inch shield cover from the drive carrier.

Carefully store the 3.5-inch shield cover for future use.

Removing the 3.5-inch shield cover