Toshiba Magnia 550d - Manual (Page 55)

Getting Started
Setting up a disk array (RAID)
38
Setting up a disk array (RAID)
If you select “Simplified setup” in the “Select RAID
configuration” window during setup (using the Server Setup
Tool), the disk array (RAID) will be configured with a minimum
number of default settings. Therefore there is no need to make
settings manually using the utility software that came with the
RAID controller.
If you select “Detailed setup” or “No setup” or if you want to set
up the disk array without using the Server Setup Tool, you need to
make settings manually.
See User’s guide of the RAID controller.
If you add a RAID controller to your server, don’t forget to install
the RAID monitoring and controlling utility programs Power
Console and Service.
The procedure for installing these programs using the Server
Setup Tool:
See User’s guide of the Server Setup Tool (on the Documentation
CD).