Toshiba Magnia 550d - Manual (Page 53)

Getting Started
Backup floppy disk
36
Backup floppy disk
The Toshiba server supporting software “Server Setup Tool for
MAGNIA 550D (hereinafter referred to as Server Setup Tool)”
contains a program that allows you to create backup floppy disks
of the drivers and utilities installed on your server. Make backup
copies of them as required and store them in a safe place.
Creating a backup floppy disk
To create a backup floppy disk with the Server Setup Tool,
proceed as follows, as well as following the instructions given on
the screen.
1 Insert the Server Setup Tool CD-ROM in to the CD-ROM
drive and the Startup Disk into the floppy disk drive. Start the
Server Setup Tool.
2 Select “Utility.”
3 Select “Create Floppy Disks.”
4 Select the name of the backup floppy disk you want to create,
and click “Create.”
5 Insert a blank 1.44 MB formatted floppy disk in to the floppy
disk drive, and click “OK.”
If the Startup Disk is still loaded in the floppy disk drive,
remove it.
For information about the backup floppy disks to be created:
See “Installing Software” on page 132.
See User’s guide of the Server Setup Tool (on the
Documentation CD).