Toshiba Magnia 550d - Manual (Page 52)

Getting Started
BIOS setup
35
BIOS setup
The factory default settings of the server can be changed using the
BIOS Setup Utility. Using this utility software, the BIOS settings
can be changed even if no operating system is installed on the
server. The system settings that you make with the BIOS Setup
Utility are written in the CMOS and flash memory, and take effect
when you restart the server.
The BIOS settings are referred to during the Power On Self Test
(POST). If the settings you make are not supported by the
hardware, an error message is displayed on the screen on
completion of the POST. In such a case, change the settings
properly using the BIOS Setup Utility.
See “System Configuration Setup” on page 104.