Toshiba Magnia 550d - Manual (Page 60)

Connecting Hardware Devices
Installing and removing optional devices
43
Before you start
WARNING: To avoid the risk of a fire, always use Toshiba
genuine devices or devices recommended by Toshiba. For
optional devices available, contact Toshiba Technical Support
or your Toshiba dealer.
Do not touch any part other than those necessary for the
work, as certain parts carry high voltages and may pose a
shock hazard.
When installing or removing an optional device (with
reference to this manual) be very careful not to drop removed
screws in to the server as ths may cause damage and
malfunction. When tightening a screw, do it firmly but with
caution.
When installing or removing an optional device, switch off the
server by the shutdown operation and disconnect the power
cable from the AC outlet. Installing or removing parts when
the server is turned on may cause an electric shock.
When connecting or installing an optional device, do not open
any part that is not described in this manual, otherwise you
are vulnerable to an electric shock.
CAUTION: When installing or removing an optional device,
wear gloves to protect your hands from sharp edges
protruding from the optional board and the inside of the
server.