Toshiba Magnia 550d - Manual (Page 195)

180
Printer interface
NOTE: In the following table, I/O denotes input/output as
viewed from the server.
Pin number Signal name Description I/O
1 STROBE_L Synchronizing output signal for loading
PD0-to-PD7 data O
2-9 PD0-PD7 Output signal for sending the 0th-to-7th
bit data O
10 ACK_L Request pulse generated by the printer
immediately after its BUSY status has
been released I
11 BUSY DC-level signal indicating whether the
printer is ready to receive data I
12 PE DC-level signal indicating that there is
no paper left in the printer I
13 SELECT DC-level signal indicating the select/
directory status of the printer I
14 AUTFD_L Input/output signal O
15 ERROR_L DC-level signal indicating a printer error I
16 PRINT_L Output signal for initializing the printer
controller O
17 SLIN_L Not used I/O
18-25 GND Signal ground
13 1
14 25