Toshiba Magnia 550d - Manual (Page 38)

Getting Started
Removing and replacing the server panels
21
Removing and replacing the server panels
To install some optional devices, the front door panel and the side
panel must be detached.
Two panels can be opened: the front door panel and the side panel.
The front door panel should always be detached first, followed by
the side panel. To replace them, reverse the order of removal.
Removing the front door panel
NOTE: Do not remove the front door panel forcibly. Doing so
may cause damage to the plastic hooks and make it
impossible to replace the front door panel.
To remove the front door panel, proceed as follows:
1 Shut down and turn off the server if it is in operation.
2 Unplug the power cable from the AC outlet.
3 Release the key-lock, pull down the latch of the lower front
door panel, and pull it toward you.
The lower front door panel will be detached.
Removing the front door panel