Toshiba Magnia 550d - Manual (Page 140)

System Configuration Setup
BIOS Setup Utility
124
ATA33................ Sets the IDE 1 cable as ATA33 (Confirm that
the IDE device and the cable are ATA33
compatible).
$ IDE 2 Conductor Cable : Auto
Used to set the type of IDE 2 cable.
Auto.................... Automatically finds the IDE 2 cable type.
ATA66/100......... Sets the IDE 2 cable as ATA66/100 (Confirm
that the IDE device and the cable are ATA66/
100 compatible).
ATA33................ Sets the IDE 2 cable as ATA33 (Confirm that
the IDE device and the cable are ATA33
compatible).
$ OnBoard FDC : Auto
Used to specify whether to enable the onboard floppy disk
controller.
Auto.................... Automatically sets an assignment for the
onboard floppy disk controller.
Enabled .............. Enables the onboard floppy disk controller.
Disabled ............. Disables the onboard floppy disk controller.
$ OnBoard Serial Port 1 : Auto
Used to specify how to set an assignment for the onboard serial
port 1.
Auto.................... Automatically sets an assignment for the
onboard serial port 1.
3F8/COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4
...................Assigns the onboard serial port 1 to each
address.
Disabled ............. Sets no assignment for the onboard serial
port 1.