Toshiba Magnia 550d - Manual (Page 178)

Troubleshooting
Troubleshooting
162
See “Expansion cards” on page 96.
See the operating guide of the RAID controller.
2 Is the hard disk drive (HDD) properly connected?
See “Hard disk drive (HDD) – IDE HDD –” on page 67.
See “Hard disk drive (HDD) – SCSI HDD –” on page 74.
3 Execute the RAID controller utility to rebuild RAID.
All data may be lost if RAID is rebuilt. Do not rebuild RAID if
rebuilding is judged to be difficult.
See the operating guide of the RAID controller.
Cannot install the Operating System (OS)
A probable cause is that the hard disk drive is not recognised.
Carry out the following procedure to check the cause of the
trouble.
If this does not remedy the problem, proceed to “Remedy When
Windows NT/2000 is Unusable” on page 167.
1 Are the SCSI controller and RAID controller properly
connected?
See “Expansion cards” on page 96.
See the operating guide of the RAID controller.
2 Is the hard disk drive (HDD) properly connected?
See “Hard disk drive (HDD) – IDE HDD –” on page 67.
See “Hard disk drive (HDD) – SCSI HDD –” on page 74.
3 Increase the bootup priority of the hard disk drive (HDD) you
want to install or the controller to which that hard disk drive
(HDD) is currently connected.
4 When installing the OS, change the order in which the SCSI
controller. RAID controller and SCSI host adapter device
driver are installed.