Toshiba Magnia 550d - Manual (Page 163)

Installing Software
NetWare
147
up. After the MS-DOS is installed by the Server Setup Tool,
the environment to read the CD-ROM of the NetWare is
automatically set up.
See User’s guide of the Server Setup Tool for installing the
MS-DOS by the Server Setup Tool.
(2) Create DOS disk by the “Creating FDs” of the Server Setup
Tool, and manually set up the partition to activate the NetWare
on the MS-DOS.
(3) Install the MS-DOS and set up the MS-DOS environment
manually.
Condition of the MS-DOS environment for installing the
NetWare
If the MS-DOS is manually installed, the MS-DOS environment
for installing the NetWare must be set up in the following
condition:
(1) The extended memory has been removed.
To remove the extended memory, invalidate the lines
containing the following texts in the “Config.sys” and the
“Autoexec.bat” by the REM statement.
In “Config.sys”
HIMEM.SYS
HIGH
EMM386.EXE
In “Autoexec.bat”
SMARTDRV.EXE