Toshiba Magnia 550d - Manual (Page 47)

Getting Started
Connecting the power cable
30
Connecting the power cable
NOTE: Toshiba recommends that an uninterruptible power
supply (UPS) should be used to avoid losing data when an
unexpected system shutdown or power failure occurs.
After connecting all peripheral devices, connect the power cable to
your server as follows:
1 Plug the power cable in to the AC power connector at the rear
of the server.
Connecting the power cable
2 Plug the power cable in to an AC outlet or an uninterruptible
power supply (UPS).
WARNING: Use the power cable supplied with the server.
The use of another cable could cause a fire risk.
Plug the power cable in to a grounded AC outlet. Failure to do
so could cause a fire risk or electric shock.
Do not hold the power cable itself but by its plug when
unplugging it, otherwise the cable may be damaged, causing
a fire risk or electric shock.
NOTE: Do not share an AC outlet for the server and other
electrical equipment, such as an air conditioner or
photocopier. These consume large amounts of electrical
power as well as producing radio frequency noise.