Toshiba Magnia 550d - Manual (Page 151)

Installing Software
Windows NT ® Server 4.0
135
To select a driver for the RAID controller, proceed as follows:
1 When the Windows NT Server 4.0 Setup Disk 2 displays a
message asking whether or not to detect large capacity storage
devices, select “S=Skip Detection.”
2 Select “S=Specify Additional Device.”
3 Select “Others (Requires disk provided by a hardware
manufacturer).”
4 Insert the “MegaRAID Drivers for Series 493/475 Windows
NT” floppy disk (supplied with RAID controller MR475) in
the floppy disk driver, and press the key.
5 In the window that appears, select the following drivers:
MegaRAID NT4.0 RAID DRIVER
Selecting a driver for the IDE CD-ROM controller
To select a driver for the IDE CD-ROM controller, proceed as
follows:
1 When the Windows NT Server 4.0 Setup Disk 2 displays a
message asking whether or not to detect large capacity storage
devices, select “S=Skip Detection.”
2 Select “S=Specify Additional Device.”
3 Select “IDE CD-ROM(ATAPI1.2)/PCI IDE Controller.”