Toshiba Magnia 550d - Manual (Page 23)

Getting Started
Installing the server
6
Environmental considerations
WARNING: If debris or liquid gets in to the server, shut it
down immediately, turn off the power button, and unplug the
power cable from the AC outlet. Failure to do so could result
in a fire or shock. Contact Toshiba Technical Support or your
Toshiba dealer to ask for service.
Do not install the server on an unsteady or slanted surface,
otherwise the server may fall over, causing injury.
Do not install the server in a dusty place. Dust can cause
short circuits that could lead to fire or smoke damage.
Do not install the server where it can be exposed to rain or
mist. Rain and mist could cause a fire or shock hazard.
Do not install the server in a poorly ventilated place. Blocking
air vents or installing the server where heat from the server
cannot be discharged will cause the temperature inside the
server to rise, causing risk of a fire.
Do not install the server where it can be exposed to corrosive
gases or salty air, this could cause the server to produce
smoke.
CAUTION: Do not install the server where it can be exposed
to vibration or shock, this could cause the server to topple
over, causing injury.
Do not install the server where the temperature can rise, for
example, exposure to direct sunlight or near to a heater, this
can cause the temperature inside the server to rise, causing
the possibility of fire in the worst case.