I/o ports – Toshiba Magnia 550d User Manual
Page 36
Getting Started
Rear of the server
19
I/O ports
I/O ports allow peripheral devices to be connected to the server.
$
Keyboard port (
)
Used to connect the keyboard (supplied with the server).
$
Mouse port (
)
Used to connect the mouse (supplied with the server).
$
Parallel port (
)
Used to connect a printer.
$
USB ports (
)
Used to connect USB (Universal Serial Bus) devices. (When
connecting a USB device, ensure that the operating system
installed supports USB.)
$
RGB port (
)
Used to connect the monitor.
$
LAN port (
)
Used to connect to a 100BASE-TX/10BASE-T Ethernet LAN.
$
Full-duplex (FULL)
On...Full-duplex communications
Off...Half-duplex communications
$
Link status indicator (LINK)
Indicates the communication status.
On ... Correctly connected and on standby
Flashing ... In communication
Off ... Network cable not connected or connected incorrectly
$
Speed indicator (100M)
Indicates the data transfer speed.
On ... Data transferred at 100 Mbps
Off ... Data transferred at 10 Mbps
$
Serial port 1 (COM1) (
)
Used to connect an RS-232C device.
$
Serial port 2 (COM2) (
)
Used to connect an RS-232C device.
Ether