Toshiba Magnia 550d - Manual (Page 146)

System Configuration Setup
BIOS Setup Utility
130
Resetting all setup options to their default values
To reset all setup options to their default values, proceed as
follows:
1 Select “LOAD OPTIMIZED DEFAULTS” from the Setup
menu.
2 Using “STANDARD CMOS SETUP” in the Setup menu, set
the system date and time.
3 Using “BIOS FEATURES SETUP” in the Setup menu,
change settings as specified below.
S.M.A.R.T. for Hard Disks: Enabled
4 Using “CHIPSET FEATURES SETUP” in the Setup menu,
change settings as specified below.
SDRAM Timing by SPD: Enabled
DRAM Integrity Mode: Ecc
USB Controller: USB Port 0&1
5 If a Windows 2000 Server is installed, also change the
following setting, using “PNP/PCI CONFIGURATION” in
the Setup menu.
Plug and Play Aware O/S: Yes