2 unplug the power cable, 3 remove the front door panel and side panel, Attaching the adapter plate – Toshiba Magnia 550d User Manual

Page 98

Connecting Hardware Devices

Hard disk drive (HDD) – SCSI HDD –

Installing a hard disk drive (expansion) –5.25-inch device bay–

When installing a hard disk drive in the server, first read “Before
you start” of this chapter and follow the instructions given below.

1 If the server is in operation, shut it down and switch off the

power.

2 Unplug the power cable.

NOTE: Installation of a hard disk drive while the server is

turned on may cause damage to the server or to the hard disk
drive.

3 Remove the front door panel and side panel.

4 Attach the adapter plate for the 5.25-inch device bay to the

hard disk drive to be installed.

Fasten the adapter plate with the four screws on the rear side.
Use the screw A supplied with the server.
See “Before you start” on page 43.

Attaching the adapter plate