Toshiba Magnia 550d - Manual (Page 48)

Getting Started
Turning on the server
31
Turning on the server
NOTE: Do not switch the server back on again within 10
seconds after turning it off. Turning it back on again within 10
seconds may cause it to malfunction or break down.
Do not turn on the server before connecting all peripheral
devices.
Turning on the server
To turn on the server, proceed as follows:
1 Ensure that all the peripheral devices, including the monitor,
keyboard, and mouse, are correctly connected to the server.
2 Ensure that all power cables are connected to grounded AC
outlets or to an uninterruptible power supply (UPS).
3 Turn on the monitor.
4 Press the power button on the server.
Check that the green power ON indicator ( ) is ON.
Turning on the server by the “Wake On LAN” function
This server has the “Wake On LAN” function that the server can
be started up by a client who is in connection with the network.