Toshiba Magnia SG30 - Manual (Page 92)

96 Setting Up Your Local Area Network
Connecting to an existing corporate network
5.375 x 8.375 ver 2.1
Connecting to an existing corporate network
Instead of connecting the Magnia SG30 to the Internet, you
can connect it to another local network. This is useful if the
other network has Internet access, or if you need to transfer
files between the Magnia SG30 and the corporate LAN.
Using a suitable cable, connect the corporate LAN to the
Magnia SG30’s public Ethernet port.
Locating the Ethernet ports on the Magnia SG30
NOTE: Do not connect the LAN to any of the private ports. This
action may affect LAN performance. Use only the “public” port for
LAN connection.
Configure the Magnia SG30 to the corporate LAN option. If
you do this when setting the server up for the first time, you
can select this option through the Server Setup Wizard.
If you have already set up your system, use the
Administration Web site to configure the Magnia SG30.
1 Click the Network tab. Make sure the Internet menu has
been selected.
2 A screen appears confirming your Internet connection
type and configuration. Select the Internet Connection
Configure option.
3 Select the Corporate LAN or Cable Modem option.
Click Next.
Connect the corporate LAN to this port