Toshiba Magnia SG30 - Manual (Page 287)

299
5.375 x 8.375 ver 2.1
Appendix E
System Recovery CD
A system recovery CD is now available to restore the
Magnia SG30 hard drive to the original factory image. The
recovery CD will reformat the Magnia SG30 hard drive and
then reinstall all of the factory software.
Before running the System Recovery CD:
❖ Remove the secondary hard disk if it is installed in the
Magnia SG30 before booting from the Recovery CD. If
the second drive is not removed before the recovery
process begins, all data on the second hard drive will be
lost.
❖ Disconnect all USB devices from the SG30 except for a
USB CDROM which will be used to perform the system
recovery.
To perform the system recovery:
1 Shutdown the Magnia SG30 and unplug the power cord.
2 Attach a USB 2.0 CDROM drive to one of the Magnia
SG30 USB ports and power on the CDROM drive. (The
CDROM drive can be a CDRW drive as well)