Toshiba Magnia SG30 - Manual (Page 274)

286 Configuring a Macintosh as a Client
Configuring a Macintosh client
5.375 x 8.375 ver 2.1
6 Set Configure to Using DHCP Server.
7 Close the TCP/IP dialog box.
8 From the Finder application in the Special menu, select
Restart to restart the computer.
User Accounts
As the server for your local area network, the Magnia SG30
requires accounts with user names and passwords for each of
your users. To log in to the Magnia SG30 as a specific user,
you must first be logged in to your client computer as that
same user.
NOTE: The user name and password must match on both
computers.
Using your current user name and password
If you are setting up an existing user:
1 Start your web browser.
2 In the URL address line, type http://Myserver.loc and press
Enter.
HINT: You can also use the address http://192.168.1.1.
3 From the Toshiba Appliance Administration page, click
the System tab. Once the System page displays, click
Users.
The Enter Network Password dialog box appears.
4 If this will be the first user added to the system, type the
user name applianceadmin and the password
toshiba .