Toshiba Magnia SG30 - Manual (Page 86)

90 Setting Up Your Local Area Network
Communicating with the Magnia SG30
5.375 x 8.375 ver 2.1
Turning on the Magnia SG30
Press the Power/Shutdown button on the front of the
Magnia SG30 to turn on the unit. This process takes from 45
to 60 seconds. During this time, the LCD panel displays the
message, “Magnia SG30” with an asterisk moving back and
forth. When the system has finished loading, the LCD panel
reverts to its Date/Time display, indicating it is ready for use.
Now you can access the Administration Web site, file and
printer sharing, Internet gateway and other services.
If the Magnia SG30 is shut down incorrectly, it may take
several minutes to warm up. To avoid this delay, always make
sure it is properly shut down.
Shutting down the Magnia SG30
As a general rule, you can leave the Magnia SG30 running at
all times. If you plan to unplug the unit, make sure the system
is shut down properly. Always use the Power/Shutdown
button at the front of the unit, or the shutdown command in
the Administration Web Site to turn off the Magnia SG30.
Shutting down the Magnia SG30
To shut down the Magnia SG30 using the Power/Shutdown
button:
1 Press the Power/Shutdown button.
The LCD panel displays a confirmation message.
2 Press the Power/Shutdown button again within five
seconds to confirm shutdown.
The LCD panel light turns off.
Power/Shutdown button