Toshiba Magnia SG30 - Manual (Page 170)

177 Managing the Server
Using the second disk drive
5.375 x 8.375 ver 2.1
Secure the disk drive with the thumbscrew (do not over
tighten).
Installing the disk drive
9 Close the top of the case and secure it with the
thumbscrew.
10 Plug in the power cable, reconnect the client computers,
and turn on the Magnia SG30 and the client computers.
If you added a second disk drive, the Magnia SG30 will
recognize the drive.
11 Configure the disk drive.
❖ To configure the disk drive as a backup device or as
additional storage, see
“Configuring the second disk
drive for snapshots” on page 179 .
❖ To configure the disk drive as a primary disk drive
replacement, see
“Installing the second disk drive as
the primary disk drive” on page 181 .
Secondary disk drive usage
A second disk drive can be used in two different ways,
depending on your network needs.
1 A second disk drive can be configured to contain periodic
snapshots of your primary disk drive.
Primary disk drive
Secondary disk drive