Toshiba Magnia SG30 - Manual (Page 188)

195 Managing the Server
Viewing server health status
5.375 x 8.375 ver 2.1
problem condition is shown with the bullet on the left of an
item changing color to yellow.
Example of the Temperature Status report
If the health system indicates that internal temperature is too
high, check to make sure the unit is in a well-ventilated area.
It may be helpful to move the server to another room that is
cooler. Also check to make sure the ventilation holes in the
sides of the unit are not blocked. If a fan failure is causing the
unit to overheat, this will be shown in the fan status.
Voltage status
The Magnia SG30 has a robust power supply that should
perform well for the entire life of the unit. However, if there
is a problem, the health monitoring system will detect any
significant change in the power flow to a variety of system
components. Problem warnings will appear on the LCD and
in the Administration Web site.
Some variation in voltage is normal in systems. The Magnia
SG30 is preconfigured to detect abnormal variations, which
will cause the bullet to the left of the voltage item to turn
yellow.
If the voltages on your system appear to be consistently or
repeatedly abnormal, contact Toshiba for service.