Toshiba Magnia SG30 - Manual (Page 266)

277 Manually Configuring Clients for the Magnia SG30
Manually configuring clients with Windows NT 4.0, Windows
2000 and Windows XP operating systems
5.375 x 8.375 ver 2.1
3 In the Network Protocols list, select TCP/IP Protocol,
then click Properties.
4 When the TCP/IP Properties dialog box appears, click the
IP Address tab.
5 From the drop-down Adapter list, select the adapter that
you wish to use for connecting to the Magnia SG30.
NOTE: If Specify IP Address is selected, and you have numbers in
the IP Address box or the Subnet Mask box, write them down now.
6 Select the option Obtain an IP Address Automatically.
7 Click OK to close the TCP/IP Properties dialog box.
8 Click the Identification tab.
9 Verify that the computer name displayed is unique for
your network.
10 If it is not a unique name, click Change and change it to
one that will not be used by any other computer.
NOTE: Write down the existing Domain or Workgroup name.
11 In the Workgroup box, click Change and type in
SAWORKGROUP (all uppercase letters) to completely
replace any text that was there before.
NOTE: Make sure you select the Workgroup box, not the Domain
box.
12 Click OK to close the Network Properties dialog box.
13 Restart your computer.