Toshiba Magnia SG30 - Manual (Page 176)

183 Managing the Server
Using an External USB Hard Disk
5.375 x 8.375 ver 2.1
Using an External USB Hard Disk
The Magnia SG30 allows you to connect an external USB
hard disk (HDD) to one of its USB ports in the back. This
extra disk can be formatted and used for extra storage on the
system. Because it is also portable, an external USB hard
disk can be removed and taken to other systems for use. The
external USB HDD can also be used for storage of backup
images.
Connecting a USB HDD to the Magnia SG30
To connect a USB hard disk to the Magnia SG30, plug its
USB cable in to one of the USB connectors in the back of the
Magnia SG30. The HDD can be connected to either of the
USB connections.
Connecting a USB HDD to the SG30
❖ After connecting the USB HDD, plug it in and turn it on
if there is an on/off switch.
❖ To view the USB HDD status, go to the Administrative
Web interface, select the System tab, and click on the
USB Drive menu item. If no HDD has been detected, the
screen will inform you that no USB drive is present.
USB connectors